AQUAPHON A 50

Acoustic Water Leak Detector

  • Brilliant piezo microphone technology for reliable leak detection
  • Extremely low weight for fatigue-free working over many hours
  • The long battery life allows for up to a week of use without recharging.
  • Illuminated display with optimized tilt angle and automatic display rotation
  • Individually adjustable filters and frequencies

The AQUAPHON A 50 is the entry point into Sewerin’s acoustic water leak location. It amplifies and filters the leak noise that travels through the pipe wall and the surrounding ground, letting you pinpoint the leak position precisely. The adjustable bandpass filter and 50/60 Hz notch isolate the leak sound from traffic and background interference, and the 2″ FSTN display shows the measured level on a clear 0–999 digit scale.

A two-part sensor system covers the whole survey: the TS 50 carrying rod for listening along the pipe run, and the UM 50 universal microphone for direct contact on fittings, hydrants and valves. Order the SDR (Sewerin Digital Radio) variant for cable-free operation with wireless headphones.

A built-in lithium-ion battery delivers over 20 hours of listening from a charge of under six hours, and the sealed IP65 polycarbonate housing keeps working from -20 °C to 50 °C.

Key Features

Acoustic leak location Amplifies leak noise conducted through pipe and ground for precise pinpointing.
Adjustable bandpass filter Lower 0-500 Hz / upper 500-8000 Hz limits plus a 50/60 Hz notch filter.
2 in FSTN display 240 x 128 pixel LED-backlit display with a 0-999 digit level indication.
Two-part sensor system TS 50 carrying rod for surveying and UM 50 universal microphone for contact.
Optional SDR wireless Sewerin Digital Radio variant supports wireless headphones.
All-day battery Built-in Li-ion gives over 20 hours; full charge in under 6 hours.
Rugged and sealed IP65 polycarbonate housing rated -20 to 50 C.

Specifications

Device

Dimensions (W x D x H)115 x 65 x 114 mm
Weight0.4 kg
MaterialPolycarbonate housing
Display2 in FSTN, 240 x 128 px, LED backlight
Processor16-bit digital signal processor
OperationMembrane keypad, 1 activation key
Protection ratingIP65

Measurement

FilterBandpass; lower 0/30/60/120/250/500 Hz; upper 500-8000 Hz; notch 50/60 Hz
Sampling rate16 bit, 48 kHz
Indication range0-999 digits

Power & Data

BatteryBuilt-in rechargeable Li-ion, 24 Wh
Operating time> 20 h (typical)
Charging time< 6 h
WirelessSDR variant: 2.408-2.476 GHz wireless headphones

Conditions

Operating temperature-20 to 50 C
Humidity15-90 % r.h., non-condensing
VariantsWith SDR (FCC, CE, IC, MIC) or without SDR (FCC, CE)

What's in the Box

  • A 50 Receiver
  • Carry belt
  • Wired headphones (optional wireless)
  • UM 50 Microphone
  • Applicable chargers and accessories
  • A 50 Backpack

Compatible Sensors & Microphones

  • UM 50

Interested in the AQUAPHON A 50?

Request pricing, availability, or a hands-on demo from our team.

Request a quote